Technical Specifications

Size and Weight

Size and Weight

Height:
3.5 inches (8.89 cm)
Width:
19 inches (48.26 cm)
Depth:
17 inches (43.18 cm)
Weight:
26 pounds (11.79 kg)
Power Configuration
  • Internal AC Supply
  • 100VAC-240VAC (different fuse for 100V,
  • 115V, and 240V)
Dc1 Dual Mode Compressor Data

Size and Weight

  • THD+N: (@+4dB, with no compression but
  • through gain cell)
  • 0.025% (A weighted), 0.041% (unweighted with
  • 6dB compression) 0.013% (A weighted), 0.013%
  • (unweighted)
  • Frequency Response: 5dB >200kHz +/- 3dB,
  • 5Hz-136kHz +/-0.5dB
  • Gain: -4dB to +10dB
  • Attack: variable from 4mS to 100mS
  • Release: variable from50mS to 1S

  • Ratio: Classic or Tight
  • Metering: 10 segment LED for gain reduction
  • IO: Balanced XLR +4dB in and out,
  • 1/4" side chain, 1/4" stereo link
Db2- Drive Bus Master Output and Overdrive

Size and Weight

  • THD+N (@+4dB, no cut or boost):
  • Bypass: 0.002% (A weighted), 0.008% (unweighted)
  • Tube: 0.3% to overdrive (unweighted)
  • Solid State: 0.013% to overdrive (unweighted)

  • Frequency Response:
  • Tube 5Hz -> 50kHz +/- 2dB, 5Hz -> 25kHz +/- 0.5dB
  • Solid State 5Hz- > 200kHz +/- 2dB, 5Hz-130kHz +/- 0.5dB
  • Gain: +20dB
  • Type: Tube (12AX7A) or discrete transistor
  • Metering: analog VU output level
  • IO: balanced XLR +4dB in and out, -10dB 1/4" TRS out
Mz2 Microphone Preamplifier

Size and Weight

  • Max gain: +60dB (plus 20dB when routed
  • through the Db2 drive bus output)
  • THD+N (@ +30dB): 0.008% (A weighted), 0.01% (unweighted)
  • Max Out: +25dB
  • Frequency Response: Solid State 10Hz-200kHz +/- 3dB;
  • 15Hz-120K +/-0.5dB
  • Tube 15Hz-159K +/-3dB, 0Hz-65Hz +/- 0.5dB
  • Input impedance: 2K ohms
  • Type: Switchable tube (12AX7A) or discrete transistor
  • HPF: 60Hz, 6dB/8va
  • Metering: 10 segment LED
  • Phantom Power +48VDC
  • Pad: -20dB
  • Polarity: 0 or 180 degrees
  • IO: Balanced XLR mic in, front panel 1/4" Hi-Z in, balanced XLR +4dB
  • (nominal) out, 1/4" TRS -10dB (nominal)
Fe1- Passive 3 Band Equalizer

Size and Weight

  • THD+N (@+4dB, no cut or boost): (A weighted) 0.009%,
  • (unweighted) 0.025%
  • Frequency Response: 5Hz- 100kHz +/-0.5dB ,
  • 5Hz- >200kHz +/-3dB

  • Frequencies:
  • Low 33, 60, 100, 150, 270, 390HZ (peak or shelf)
  • Mid peaking bandwidth: 2 octaves
  • High shelf: 6dB/8va, peaking bandwidth 2 octaves
  • IO: balanced XLR +4dB in and out
Warranty
  • 3 year limited warranty.
Specifications subject to change.